LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Rear Drive Shaft >> Assembly

Rear Drive Shaft: Assembly

Assemble in the reverse order of disassembly.

NOTE:
  • Use new ball bearings and revolution gear.
  • Make sure the clutch hub is facing the correct direction.
    Fig 1: Identifying Front/Rear Clutch Hub And Revolution Gear
    G06342961Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals