LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

  1. Remove the transmission assembly from vehicle body. Ref. to REMOVAL , Automatic Transmission Assembly.
  2. Pull out the torque converter assembly. Ref. to REMOVAL , Torque Converter Assembly.
  3. Remove the transmission harness connector from stay.
  4. Disconnect the air breather hose. Ref. to REMOVAL , Air Breather Hose.
  5. Remove the oil charge pipe. Ref. to REMOVAL , Oil Charge Pipe.
  6. Remove the ATF inlet and outlet pipes. Ref. to REMOVAL , ATF Cooler Pipe and Hose.
  7. Separate the converter case and transmission case. Ref. to REMOVAL , Converter Case.
  8. Remove the drive pinion shaft mounting bolts, and then remove the drive pinion shaft assembly from oil pump cover.
    Fig 1: Identifying Drive Pinion Shaft Mounting Bolts
    G05022351Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the oil pump cover from AT main case. Ref. to OIL PUMP COVER .
scientia non olet · About LEMON Manuals