LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> System Operation Check Mode >> Operation >> Idling Ignition Timing Fixed

Idling Ignition Timing Fixed

CAUTION: After executing the operation check mode, execute the Clear Memory Mode. Ref. to OPERATION , Clear Memory Mode.
  1. On the «System Operation Check Mode» display screen, select the {Fixed Idle Ignition Timing}.
  2. On the «Start the Engine» display screen, start the engine and click the [OK] button.
  3. On the «Fixed Idle Ignition Timing» display screen, click the [Execution] button and execute idling ignition timing fixed.
  4. Click the [Cancel] button to stop the idle ignition timing fixed.
  5. Click the [[F12] Exit] button to end the idle ignition timing fixed. The display will then return to the «System Operation Check Mode» screen.
    NOTE: For detailed operation procedure, refer to SUBARU SELECT MONITOR .
scientia non olet · About LEMON Manuals