LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) (Diagnostics) >> Clear Memory Mode >> Operation

Clear Memory Mode: Operation

  1. On the «Main Menu» display screen, select the {Each System Check}.
  2. On the «System Selection Menu», select the {Brake Control System}.
  3. Click the [OK] button after the {VDC} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Clearing Memory}.
  5. When the "Clear Memory?" is shown on the screen, click the "YES" button.
  6. When "Done" and "Turn off the ignition switch" is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For details concerning the operation procedure, refer toSUBARU SELECT MONITOR .
scientia non olet · About LEMON Manuals