LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Installation

Impact Sensor: Installation

  1. Remove the key from ignition switch.
  2. Close all doors and the rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Disconnect the ground cable from the battery.
  5. Install the impact sensor.
  6. Connect the battery ground cable to the battery.
  7. Change the setting of impact sensor using Subaru Select Monitor.
scientia non olet · About LEMON Manuals