LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Engine (Diagnostics) (H6DO) >> System Operation Check Mode >> Operation >> Fuel Pump Control (On/Off Operation)

Fuel Pump Control (On/Off Operation)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode. Ref. to OPERATION , Clear Memory Mode.
  1. On the «System Operation Check Mode» display, select the {Fuel Pump Control}.
  2. On the «Fuel Pump Control» display screen, select the {ON/OFF Dr.}.
  3. On the «Turn Ignition Switch ON with Engine Stalled» display screen, turn the ignition switch to ON and click the [OK] button.
  4. On the «ON/OFF dr.» display screen, click the [Execution] button and execute ON/OFF drive.
  5. Click the [Cancel] button to stop the ON/OFF drive.
  6. Click the [[F12] Exit] button to end the ON/OFF drive. The screen will return to the «Fuel Pump Control» screen.
    NOTE: For detailed operation procedure, refer to SUBARU SELECT MONITOR .
scientia non olet · About LEMON Manuals