SUBARU Select Monitor (OBD Mode)

On the «Main Menu», select {Each System Check}.
On the «System Selection Menu», select {Engine Control System}.
Click the [OK] key after the information regarding engine type has been displayed.
On the «Engine Diagnosis» display screen, select the {OBD System}.
On the «OBD Menu» display screen, select the {Diagnostic Code(s) Display}.
Make sure DTC is shown on the screen.
NOTE:
- For detailed operation procedure, refer to SUBARU SELECT MONITOR .
- For details concerning DTC, refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .