SUBARU Select Monitor (Normal Mode)

On the «Main Menu», select {Each System Check}.
On the «System Selection Menu», select {Engine Control System}.
Click the [OK] key after the information regarding engine type has been displayed.
On the «Engine Diagnosis» display screen, select {Diagnostic Code(s) Display}.
On the «Diagnostic Trouble Code» screen, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.
NOTE:
- For detailed operation procedure, refer to SUBARU SELECT MONITOR .
- For details concerning DTC, refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .