LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)

SUBARU Select Monitor (OBD Mode)

  1. On the «Main Menu», select {Each System Check}.
  2. On the «System Selection Menu», select {Engine Control System}.
  3. Select [OK] after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System}.
  5. On the «OBD Menu» display screen, select the {Clear Diagnostic Code}.
  6. When the "Clear Diagnostic Code?" is shown on the screen, click the [Yes] button.
  7. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.
    NOTE:
    • Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine after 10 seconds or more have passed since turning the ignition switch to ON.
    • For detailed operation procedure, refer to SUBARU SELECT MONITOR .
scientia non olet · About LEMON Manuals