LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0340 Camshaft Position Sensor "A" Circuit (Bank 1 Or Single Sensor) >> Diagnostic Method

Diagnostic Method

Judge as NG when the condition where the number of camshaft position sensor signals are less than 3 times during 2 engine revs, continues.

Judgement Value 

JUDGEMENT VALUE REFERENCE

Malfunction Criteria Threshold Value
Amount of camshaft sensor signal during 2 revs. < 3 time(s)

Time Needed for Diagnosis:  Two engine revolutions x 4 °CA

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK and clear the NG when the malfunction criteria below are met.

Judgement Value 

JUDGEMENT VALUE REFERENCE

Malfunction Criteria Threshold Value
Camshaft position sensor signal ≥ 3 time(s)

Time Needed for Diagnosis:  Two engine revolutions

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgement Value 

JUDGEMENT VALUE REFERENCE

Malfunction Criteria Threshold Value
Starter ON
Camshaft position sensor signal No input

Time Needed for Diagnosis:  3000 ms

Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.

Judgement Value 

JUDGEMENT VALUE REFERENCE

Malfunction Criteria Threshold Value
Camshaft position sensor signal Input exists

Time Needed for Diagnosis:  Less than 1 second