LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> LAN Communication System - LAN System (Diagnostics) >> Subaru Select Monitor >> Operation >> Read Current Data

Read Current Data

  1. Select {Each System Check} in «Main Menu» display screen.
  2. On the «System Selection Menu» display screen, select the {Integ. unit mode}.
  3. On the «Integ. unit mode failure diag.» display screen, select the {Current Data Display & Save}.
  4. Using the scroll key, scroll the display screen up or down until the desired data is shown.
    • A support list contains both of analog and digital data, and they are shown in the following chart.
scientia non olet · About LEMON Manuals