Function Check

In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

1. On the «Main Menu» display screen, select {Each System Check}.
2. On the «System Selection Menu» display screen, select the {Integ. unit mode}.
3. On the «Integ. unit mode failure diag.» display screen, select the {Function check}.
4. Select the item to be operated on the «Function check» display screen and select the [OK].
5. Pressing [OK] starts, [NO] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
   NOTE: If not equipped (based on area or condition), process will not go on.