LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. Ref. to REMOVAL , Glove Box.
  3. Remove the nut, disconnect the connector and remove the keyless entry control module.
    Fig 1: Locating Keyless Entry Control Module Nut
    G05033666Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals