LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission And Differential 5MT >> Transfer Case And Extension Case Assembly >> Assembly >> Transfer Case

Transfer Case

  1. Install the oil guide to the transfer case.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    NOTE: Use a new installing bolt.
    Fig 1: Identifying Oil Guide
    G05335771Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reverse check sleeve assembly to the transfer case. Ref. to INSTALLATION , Reverse Check Sleeve.
scientia non olet · About LEMON Manuals