LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission And Differential 5MT >> Transfer Case And Extension Case Assembly >> Assembly >> Extension Case

Extension Case

  1. Using the ST, install the oil seal to the extension case. Ref. to OIL SEAL .
    NOTE: Use a new oil seal.
  2. Install the shift bracket to extension case.

    Tightening torque: 

    24.5 N.m (2.5 kgf-m, 18.1 ft-lb) 

    Fig 1: Identifying Shift Bracket
    G05003014Courtesy of SUBARU OF AMERICA, INC.
  3. Install the transfer drive gear to the extension case. Ref. to INSTALLATION , Transfer Drive Gear.
scientia non olet · About LEMON Manuals