Transfer Case
Neutral position adjustment
ADJUSTING SHIM SPECIFICATIONS
| Adjusting shim | |
|---|---|
| Part number | Thickness mm (in) |
| 32190AA000 | 0.15 (0.0059) |
| 32190AA010 | 0.30 (0.0118) |
REVERSE ACCENT SHAFT SPECIFICATIONS
| Reverse accent shaft | ||
|---|---|---|
| Part number | Mark | Remarks |
| 32188AA130 | S | Neutral position is closer to 1st. |
| 32188AA140 | T | Standard |
| 32188AA150 | U | Neutral position is closer to reverse gear. |
Reverse check plate adjustment
REVERSE CHECK PLATE SPECIFICATIONS
| Reverse check plate | |||
|---|---|---|---|
| Part number | Mark | Angle | Remarks |
| 32189AA001 | 0 | 28° | Arm stops closer to 5th gear. |
| 32189AA011 | 1 | 31° | Arm stops closer to 5th gear. |
| 33189AA021 | 2 | 34° | Arm stops in the center. |
| 32189AA031 | 3 | 37° | Arm stops closer to reverse gear. |
| 32189AA041 | 4 | 40° | Arm stops closer to reverse gear. |