Fuel Filler Pipe: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the shut valve to the fuel filler pipe. Refer to INSTALLATION , Shut Valve.
Tighten the nuts which secure the evaporation pipe assembly to the fuel filler pipe.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Fig 1: Locating Evaporation Pipe Assembly To Fuel Filler Pipe
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Shut Valve From Fuel Filler Pipe
Courtesy of SUBARU OF AMERICA, INC.
Connect the evaporation hose to the shut valve.

Fig 3: Identifying Evaporation Hose From Shut Valve
Courtesy of SUBARU OF AMERICA, INC.