LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Intake System (H4DOTC)) >> Air Cleaner Case >> Removal

Air Cleaner Case: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Connecting/Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake duct. Ref. to REMOVAL , Air Intake Duct.
  4. Disconnect the connector (A) from mass air flow and intake air temperature sensor.
  5. Loosen the clamp (B) which connects the air intake boot and intake duct.
  6. Remove the clip (C) from the air cleaner case.
    Fig 2: Identifying Connector, Clip And Clamp
    G05340344Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the air cleaner case (rear) and air intake boot.
  8. Remove the air cleaner element.
  9. Remove the bolts (A) and nuts (B) which secure the air cleaner case (front) to the body.
    Fig 3: Identifying Air Cleaner Case, Bolt And Nut
    G05340346Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the air cleaner case (front).
scientia non olet · About LEMON Manuals