Tire Rotation: Inspection

When the tread has worn down to less than 1.6 mm (0.063 in) or the wear indicator appears across the tread, replace the tire. (Replace the right and left tire as a set.)
If the tire appears to be worn unevenly, adjust the wheel alignment.
Next, make a tire rotation between front and rear as shown in the figure, make sure tires are worn evenly.
- When the direction of tire rotation is not specified
  
  Fig 1: Tire Rotation Diagram
  Courtesy of SUBARU OF AMERICA, INC.
- When the direction of tire rotation is specified
  
  Fig 2: Tire Rotation Diagram
  Courtesy of SUBARU OF AMERICA, INC.
  
  Fig 3: Identifying Tire Damage Area
  Courtesy of SUBARU OF AMERICA, INC.
Re-register the transmitter ID when rotation was performed. (3.0 L U4 model) Refer to REGISTER TRANSMITTER ID , OPERATION, Subaru Select Monitor.