LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (H6DO)) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Battery Ground Cable
    G06336073Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake chamber. Refer to REMOVAL , Air Intake Chamber.
  4. Remove the service hole cover.
    Fig 2: Locating Service Hole Cover
    G06336074Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the crankshaft position sensor.
    Fig 3: Locating Crankshaft Position Sensor
    G06336075Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector from crankshaft position sensor.
scientia non olet · About LEMON Manuals