LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Camshaft Position Sensor >> Removal >> Camshaft Position Sensor RH

Camshaft Position Sensor RH

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from camshaft position sensor RH.
  4. Remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Locating Camshaft Position Sensor RH From Rear Side Of Cylinder Head
    G05954810Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals