Read Diagnostic Trouble Code (DTC): Operation

On the «Main Menu» display, select the {Each System Check}.
On the «System Selection Menu» display, select the {Brake Control System}.
Click the [OK] button after the {VDC} is displayed.
On the «Brake Control Diagnosis» display, select the {Diagnostic Code(s) Display}.

Record the DTC and data.

NOTE:

For detailed operation procedure, refer to the "Subaru Select Monitor ".
For details concerning DTCs, refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .
Up to 3 DTCs are displayed in the order of detection.
If a particular DTC is not stored in memory properly at the occurrence of problem (due to a drop in VDCCM & H/U power supply etc.), the DTC suffixed with a question mark "?" is displayed on Subaru Select Monitor display screen. This shows it may be an unreliable reading.

CODE DISPLAY CHART

Display	Contents to be displayed
(Current)	The current DTC is displayed on Subaru Select Monitor display screen.
(Old)	The latest DTC in previous troubles is displayed on Subaru Select Monitor display screen.
(Older)	The second latest DTC in previous troubles is displayed on Subaru Select Monitor display screen.
(Before 3)	The third latest DTC in previous troubles is displayed on Subaru Select Monitor display screen.