LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 4AT >> Transfer Clutch >> Adjustment

Transfer Clutch: Adjustment

  1. Measure the distance "A" from the end of ST to the rear drive shaft using the ST.

    ST 398643600 GAUGE

    Fig 1: Measuring Distance A From End Of ST To Rear Drive Shaft Using ST 398643600 Gauge
    G06337272Courtesy of SUBARU OF AMERICA, INC.
  2. Measure distance "B" from the transmission case mating surface to the end of ST using ST1 and ST2.

    ST1 398643600 GAUGE

    ST2 499577000 GAUGE

    Fig 2: Measuring Distance B From Transmission Case Mating Surface To End Of ST Using ST1 398643600 Gauge And ST2 499577000 Gauge
    G06337273Courtesy of SUBARU OF AMERICA, INC.
  3. Calculation formula:

    T = A - B + 35.4 mm

    [T = A - B + 1.3937 in]

    T: Thrust needle bearing thickness

    A: Distance from the end of the ST to end of rear drive shaft

    B: Distance from the mating surface of the transmission case to the end of the ST

    THRUST NEEDLE BEARING THICKNESS SPECIFICATIONS

    Thrust needle bearing
    Part No. Thickness mm (in)
    806536020 3.8(0.150)
    806535030 4.0(0.157)
    806535040 4.2(0.165)
    806535050 4.4(0.173)
    806535060 4.6(0.181)
    806535070 4.8(0.189)
    806535090 5.0(0.197)
scientia non olet · About LEMON Manuals