LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 4AT >> Reduction Drive Gear >> Disassembly

Reduction Drive Gear: Disassembly

  1. Take out the seal ring.
    Fig 1: Identifying Seal Ring And Reduction Drive Shaft
    G06337283Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing using ST.

    ST 498077600 REMOVER

    Fig 2: Removing Ball Bearing Using ST498077600 Remover
    G06337284Courtesy of SUBARU OF AMERICA, INC.
  3. Apply Vaseline to the outer surface of seal ring and shaft groove.
    Fig 3: Identifying Reduction Drive Gear
    G06337285Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals