LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System >> Rear Link >> Removal

Rear Link: Removal

  1. Lift up the vehicle, and then remove the rear wheels.
  2. Remove the rear stabilizer. Ref. to REMOVAL , Rear Stabilizer.
  3. Support the rear arm horizontally using a transmission jack.
    Fig 1: Supporting Rear Arm Horizontally Using Transmission Jack
    G06338773Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the bolts which secures the rear link to the rear arm.
    Fig 2: Identifying Rear Link And Rear Arm
    G05342915Courtesy of SUBARU OF AMERICA, INC.
  5. Place alignment marks on the rear link adjusting bolt and sub frame.
  6. Remove the bolt which secures the rear link to the sub frame, then remove the rear link.
    CAUTION: When loosening the adjusting bolt, make sure to fix the bolt head in place when loosening the nut.
    Fig 3: Loosening Adjusting Bolt
    G05342916Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals