LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Fuel Injection System (H6DO)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Battery Ground Cable
    G06336081Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intake manifold. Refer to REMOVAL , Intake Manifold.
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from the cylinder block.
    Fig 2: Identifying Knock Sensor
    G06336082Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals