Drive Cycled
- Drift Diagnosis
- Make sure that the engine coolant temperature at engine starting is less than 30°C (86°F).
- Make sure that fuel remains 10 l (2.6 US gal, 2.2 lmp gal) or more and the battery voltage is 10.9 V or more.
- Start the engine, and check that the engine coolant temperature increases by 10°C (50°F) or more, and reaches 75°C (167°F) or more, when the engine is warmed up.
- Idle the engine for 120 seconds or more in the condition of step 3.
- Stuck Diagnosis
- Make sure that the battery voltage is 10.9 V or more.
- Perform the Clear Memory Mode. Refer to CLEAR MEMORY MODE .
- Drive for approximately 50 l
(13.2 US gal, 11 lmp gal) of fuel.NOTE:
- It is acceptable to drive the vehicle intermittently.
- Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
ITEM CONDITION CHARTDTC Item Condition *P0181 Fuel Temperature Sensor "A" Circuit Range/Performance -