Front Door Glass: Removal

Remove the front door trim. Ref. to REMOVAL , Door Trim.
Remove the sealing cover. Ref. to REMOVAL , Front Sealing Cover.
Remove the outer mirror assembly. Ref. to REMOVAL , Outer Mirror Assembly.
Remove clip (A), and remove the front end of the weather strip.

Fig 1: Identifying Front End Of Weather Strip Clip
Courtesy of SUBARU OF AMERICA, INC.
Remove the gusset.

Fig 2: Locating Gusset Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the stabilizers.

Fig 3: Locating Stabilizers Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove clips (A), and remove the rear end of the weather strip.

Fig 4: Identifying Rear End Of Weather Strip Clips
Courtesy of SUBARU OF AMERICA, INC.
Remove screw (A) from the rear end of the weather strip outer, to remove the weather strip outer.

Fig 5: Identifying Weather Strip Outer
Courtesy of SUBARU OF AMERICA, INC.
Connect the ground cable to battery and power window switch connector.
Operate the power window switch to move the glass to the position shown in the figure, then remove the two nuts through the service holes.

Fig 6: Locating Power Window Switch Nuts
Courtesy of SUBARU OF AMERICA, INC.
Remove the door glass.
CAUTION:
- Since the gear may be disengaged, do not turn regulator in the closing direction after removing glass.
- Avoid impact and damage to the glass.
  
  Fig 7: Identifying Door Glass
  Courtesy of SUBARU OF AMERICA, INC.