LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Legacy i, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission 4AT) >> Reduction Driven Gear >> Disassembly

Reduction Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the snap ring from reduction driven gear.
    Fig 1: Removing Snap Ring From Reduction Driven Gear
    G06337277Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing from reduction driven gear using ST.

    ST 498077600 REMOVER

    Fig 2: Removing Ball Bearing From Reduction Driven Gear Using ST 498077600 Remover
    G06337278Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring from reduction driven gear.
scientia non olet · About LEMON Manuals