Steering Wheel: Installation
WARNING: This page is about a different variant/trim than selected.
WARNING:
Always refer to "AIRBAG SYSTEM
" before performing service on the airbag modules. Ref. to
CAUTION
, General Description.
- Align the center position of the roll connector. Ref. to ADJUSTMENT , Roll Connector.
- Install in the reverse order of removal.NOTE: Align the alignment marks on the steering wheel and steering shaft.
Tightening torque: 39 N.m (4.0 kgf-m, 28.8 ft-lb)
Column cover-to-steering wheel clearance: 2 - 4 mm (0.08 - 0.16 in)
CAUTION: Insert the roll connector guide pin into the guide hole on the lower end of the steering wheel surface. Avoid damaging the pin.