Idling Ignition Timing Fixed
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. Refer to
OPERATION , Clear Memory Mode.
- On «System Operation Check Mode» display, select {Fixed Idle Ignition Timing}.
- On «Start the Engine» display, start the engine and click the [OK] button.
- On «Fixed Idle Ignition Timing» display, click the [Execution] button and execute the idling ignition timing fixed.
- Click the [Cancel] button to stop the idling ignition timing fixed.
- Click the [[F12] Exit] button to end the idling ignition timing fixed. The screen will return to the «System Operation Check Mode» screen.NOTE: For detailed operation procedures, refer to "Subaru Select Monitor ".