Upper Arm: Installation
CAUTION:
- Use a new self-locking nut.
- Always tighten the bushing when the arm is positioned in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
- Install in the reverse order of removal.
- Inspect the wheel alignment and adjust if necessary.
Tightening torque:
Upper arm - Rear sub frame
150 N.m (15.3 kgf-m, 111 ft-lb)
Upper arm - Rear housing
90 N.m (9.2 kgf-m, 66.4 ft-lb)
Rear ABS wheel speed sensor bracket
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)