Air Cleaner Element: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector (A) from the mass air flow and intake air temperature sensor and remove the clip (B).

Fig 2: Identifying Intake Air Temperature Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Loosen the clamps (A) which connect the air cleaner case and the intake boot.
Remove the clip (B) securing the upper side of air cleaner case.

Fig 3: Identifying Intake Boot Clamp
Courtesy of SUBARU OF AMERICA, INC.
Remove the air cleaner case (rear) and air cleaner element.

Fig 4: Removing Air Cleaner Case (Rear) And Air Cleaner Element
Courtesy of SUBARU OF AMERICA, INC.