LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester XT >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> System Operation Check Mode >> Operation >> Idle Speed Control

Idle Speed Control

CAUTION: After executing the operation check mode, execute the Clear Memory Mode. Refer to OPERATION , Clear Memory Mode.
  1. On the «System Operation Check Mode» display screen, select the {Idle Speed Control}.
  2. On the «Start the Engine» display screen, start the engine and click the [OK] button.
  3. In the «Idle Speed Control» screen, click the [↓] button or the [↑] button to change the setting values, then click the [OK] button.

    Setting is possible in a range between 500 RPM - 2,000 RPM, in increments of 50 RPM. However, the engine speed that can actually be controlled will vary depending on the vehicle.

  4. Click the [Cancel] button to end the idle speed control. The screen will return to the «System Operation Check Mode» screen.
NOTE: For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.
scientia non olet · About LEMON Manuals