Fuel Pump Control (Off Drive)
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode. Refer to
OPERATION , Clear Memory Mode.
- On the «System Operation Check Mode» display, select the {Fuel Pump Control}.
- On the «Fuel Pump Control» display screen, select the {OFF Drive}.
- On the «Start the Engine» display screen, start the engine and click the [OK] button.
- Click the [Cancel] button to end the OFF drive. The screen will return to the «Fuel Pump Control» screen.
NOTE:
For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.