Automatic Transmission Fluid: Replacement

Lift up the vehicle.
Remove the drain plug to drain the automatic transmission fluid (ATF).
CAUTION: If any ATF is spilt on the exhaust pipe, wipe it off completely with a clean cloth.

NOTE: Before starting work, allow the ATF to cool completely.
Check the condition of the drained ATF. Refer to CONDITION CHECK , Automatic Transmission Fluid.

Fig 1: Locating Drain Plug
Courtesy of SUBARU OF AMERICA, INC.
Replace the gasket with new part, and then tighten the drain plug to specified torque.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Lower the vehicle.
Pour ATF from the oil charge pipe.
Recommended fluid:

Refer to FLUID , RECOMMENDED MATERIALS, Recommended Materials.

Fluid capacity:

Refill with the same amount of ATF drained from the ATF drain hole .
Check the level and leaks of the ATF. Refer to INSPECTION , Automatic Transmission Fluid.

Fig 2: Identifying Oil Level Gauge

Courtesy of SUBARU OF AMERICA, INC.