EGR Valve Control
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode Refer to
OPERATION , Clear Memory Mode.
- On the «System Operation Check Mode» display, select the {EGR Valve Control}.
- On the «Start the Engine» display screen, start the engine and click the [OK] button.
- In the «EGR Valve Control» screen, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.
Setting is possible in 1 STEP increments. However, the number of STEPs that can actually be controlled will vary depending on the vehicle.
- Click the [Cancel] button to end the EGR valve control. The screen will return to the «System Operation Check Mode» screen.
NOTE:
For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.