"P" Range Switch

Remove the console box. < Ref. to REMOVAL , Console Box . >
Disconnect the connector.
Remove the connector from the base plate using a flat-tip screwdriver.

Fig 1: Removing Connector From Base Plate Using Flat-Tip Screwdriver
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the terminal of "P" range switch from connector, using a flat-tip screwdriver with thin tip.

Fig 2: Disconnecting Terminal Of "P" Range Switch From Connector, Using Flat-Tip Screwdriver
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip while being careful not to break the pin, then remove the P range switch.

Fig 3: Removing P Range Switch
Courtesy of SUBARU OF AMERICA, INC.