LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Reduction Driven Gear >> Installation

Reduction Driven Gear: Installation

  1. Set the range select lever to the "P" range.
  2. Use a plastic hammer to install reduction driven gear assembly.
  3. Select the reduction gear shims. <Ref. to ADJUSTMENT , Reduction Driven Gear.>
  4. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. <Ref. to INSTALLATION , Extension Case.>
  5. Install the transmission assembly to the vehicle. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
scientia non olet · About LEMON Manuals