LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> AT Main Case >> Disassembly >> Input Clutch Pack Assembly

Input Clutch Pack Assembly

  1. Remove the front sun gear.
    Fig 1: Identifying Front Sun Gear
    G05022424Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the thrust bearing.
  3. Remove the snap ring, and then remove the front carrier.
    Fig 2: Identifying Snap Ring
    G05022425Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the input clutch assembly from rear internal gear.
    Fig 3: Identifying Input Clutch Assembly
    G05022426Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals