Rear Shock Absorber: Installation

NOTE:

Be sure to use a new self-locking nut.
Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.

Install in the reverse order of removal.
CAUTION: Attach so that the protrusion on the top of the mount is pointed towards the front of the vehicle.

Fig 1: Identifying Shock Absorber Components
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: Refer to "COMPONENT" of "General Description" for the tightening torque. < Ref. to COMPONENT , General Description . >
Check the wheel alignment and adjust it if necessary.