LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Steering Wheel >> Removal

Steering Wheel: Removal

  1. Disconnect the ground cable from the battery.
  2. Set the tire to the straight-ahead position.
  3. Remove the airbag module. <Ref. to REMOVAL , Driver's Airbag Module.>
    WARNING: Always refer to "AIRBAG SYSTEM " before performing service on the airbag modules. <Ref. to CAUTION , General Description.>
  4. Place alignment marks on the steering wheel and steering shaft.
    Fig 1: Identifying Alignment Marks
    G05671391Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the steering wheel nut, and then draw out the steering wheel from shaft using steering puller.