LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Passenger's Airbag Module >> Removal

Passenger's Airbag Module: Removal

CAUTION: Refer to "CAUTION" of "General Description" before handling the airbag module. < Ref. to CAUTION , General Description.>
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the glove box. < Ref. to REMOVAL , Glove Box.>
  4. Remove the mounting bolts of the passenger's side airbag module.
    Fig 1: Locating Passenger Airbag Module Mounting Bolts
    G05033174Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the instrument panel upper. < Ref. to INSTRUMENT PANEL UPPER , REMOVAL, Instrument Panel Assembly.>
  6. Remove the screws, and remove the passenger's airbag module.
    Fig 2: Locating Passenger Airbag Module Screws
    G05033175Courtesy of SUBARU OF AMERICA, INC.
  7. Refer to "CAUTION" for handling of a removed airbag module. < Ref. to CAUTION , General Description.>
scientia non olet · About LEMON Manuals