LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> Drive Cycle >> Procedure >> Drive Cycle E

Drive Cycle E

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
  3. Drive for approximately 30 l  (7.9 US gal, 6.6 lmp gal) of fuel.
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
    DRIVE CYCLE E REFERENCE CHART

    DTC Item Condition
    P0461 Fuel Level Sensor Circuit Range/Performance -
scientia non olet · About LEMON Manuals