SUBARU Select Monitor (OBD Mode)

On the « Main Menu » display screen, select the {Each System Check}.
On the « System Selection Menu » display screen, select the {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On the « Engine Diagnosis » display screen, select the {OBD System}.
On the « OBD Menu » display screen, select the {Diagnostic Code(s) Display}.
Make sure DTC is shown on the screen.
NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "LIST OF DIAGNOSTIC TROUBLE CODE (DTC) ".