SUBARU Select Monitor (Normal Mode)
- On the « Main Menu » display screen, select the {Each System Check}.
- On the « System Selection Menu » display screen, select the {Engine Control System}.
- Click the [OK] button after the information of engine type has been displayed.
- On the « Engine Diagnosis » display screen, select the {Diagnostic Code(s) Display}.
- On the « Diagnostic Trouble Code » screen, select {Temporary Code} or {Memory Code}.NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "LIST OF DIAGNOSTIC TROUBLE CODE (DTC) ".