LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> LAN Communication System - LAN System (Diagnostics) >> Subaru Select Monitor >> Operation >> Read Current Data

Read Current Data

  1. On the « Main Menu » display screen, select the {Each System Check}.
  2. On the « System Selection Menu » display screen, select the {Integ. Unit mode}.
  3. On the « Integ. Unit mode failure diag » display screen, select the {Current Data Display & Save}.
  4. Using the scroll key, scroll the display screen up or down until the desired data is shown.
    • A support list contains both of analog and digital data, and they are shown in the following table.
scientia non olet · About LEMON Manuals