Function Check

In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

1. On the « Main Menu » display screen, select the {Each System Check}.
2. On the « System Selection Menu » display screen, select the {Integ. Unit mode}.
3. On the « Integ. unit mode failure diag » display screen, select the {Function Check}.
4. Select the item to be operated on the « Function Check » display screen and select the [OK].
5. Pressing [OK] starts, [NO] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
   NOTE: If not equipped (based on area or condition), process will not go on.