LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> LAN Communication System - LAN System (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the « Main Menu » display screen, select the {2. Each System Check}.
  2. On the « System Selection Menu » display screen, select the {Integ. Unit mode}.
  3. Select the [OK] after the information of body integrated unit type is displayed.
  4. On the « Integ. unit mode failure diag » display screen, select the {Clear Memory}.
    DISPLAY CHART

    Display Contents to be monitored
    Clear memory? Clear function of DTC and freeze frame data
  5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For details concerning the operation procedure, refer to the "PC application for Subaru Select Monitor".
scientia non olet · About LEMON Manuals