Read Current Data: Operation

On the « Main Menu » display screen, select the {Each System Check}.
On the « System Selection Menu » display screen, select the {Integ. Unit mode}.
On the « Integ. Unit mode failure diag » display screen, select the {Current Data Display & Save}.
On the « Data Display Menu » display screen, Select the {12 Data Display}.
Using the scroll key, scroll the display screen up or down until the desired data is shown.
<Ref. to DISPLAY OF ANALOG DATA , OPERATION, Subaru Select Monitor.> <Ref. to DISPLAY OF ON/OFF DATA , OPERATION, Subaru Select Monitor.> <Ref. to CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor.>